4
Signal Words
The following signal words, as defined by ANSI Z535.4-1998, are used in the
Cannonball 3 Dilution and Reference Manuals.
indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
indicates a potentially hazardous situation which,
if not avoided, could result in death or serious injury.
indicates a potentially hazardous situation, which if
not avoided, may result in moderate or minor injury.
CAUTION used without the safety alert symbol indicates a
potentially hazardous situation which, if not avoided, may result in
property damage.
Warnings
1.
The Cannonball 3 personal, portable gas detector has been
designed for the detection of dangerous atmospheric conditions. An alarm
condition indicates the presence of a potentially life-threatening hazard and
should be taken very seriously.
2.
In the event of an alarm condition it is important to follow
established procedures. The safest course of action is to immediately leave the
affected area, and to return only after further testing determines that the area is
once again safe for entry. Failure to immediately leave the area may result in
serious injury or death.
3.
Use only Energizer E95 or EN95, Duracell MN1300, or Duracell
PC1300, 1.5V D cell Alkaline batteries in the Cannonball 3. Substitution of
batteries may impair intrinsic safety.
4.
The accuracy of the Cannonball 3 should be checked
periodically with known concentration calibration gas. Failure to check
accuracy can lead to inaccurate and potentially dangerous readings.
5.
The accuracy of the Cannonball 3 should be checked
immediately following any known exposure to contaminants by testing with
known concentration test gas before further use. Failure to check accuracy can
lead to inaccurate and potentially dangerous readings.
6.
A sensor that cannot be calibrated or is found to be out of
tolerance should be replaced immediately. An instrument that fails calibration
may not be used until testing with known concentration test gas determines that
accuracy has been restored, and the instrument is once again fit for use.
7.
Do not reset the calibration gas concentration unless you are
using a calibration gas concentration that differs from the one that is normally
supplied by Sperian for use in calibrating the Cannonball 3.
Customers are strongly urged to use only Sperian Instrumentation calibration materials
when calibrating the Cannonball 3. Use of non-standard calibration gas and/or calibration
kit components can lead to dangerously inaccurate readings and may void the standard
Sperian Instrumentation warranty.
8.
Use of non-standard calibration gas and/or calibration kit
components when calibrating the Cannonball 3 can lead to inaccurate and
potentially dangerous readings and may void the standard Sperian
Instrumentation warranty.
(36 paginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales